Product Categories
Social Media
Tang Break-off Tools and Insert Extracting Tool

Tang Break-off Tools and Insert Extracting Tool

Tang Break Off Tools Tang break off tools are available in hand, semi automatic spring type and pneumatic..The spring loaded and pneumatic tang break tools are recommended for removal of tangs in production applications. For large diameter fine thread inserts, e.g. M18-1.5 and above, 3/4- 16 and...

Product Details

Tang Break Off Tools

Tang break off tools are available in hand, semi automatic spring type and pneumatic..The spring loaded and pneumatic tang break tools are recommended for removal of tangs in production applications. For large diameter fine thread inserts, e.g. M18-1.5 and above, 3/4- 16 and above, the use of long nose pliers is an alternative method to break the tang.

Manual Tang Break Tool

The simple Recoil manual magnetic tang removal tool is suitable for low volume tang removal and is used for insert sizes up to 1/2” or M12. The magnet allows for easy retrieval of the tang.

On larger sizes the multipurpose Recoil installation and tang break tool should be used. For tang removal,the tool is simply lifted and turned 90°, which will put the slot at right angles to the tang, then pushed downward with a sharp blow.

Spring Loaded Tang Break Tool 

Spring loaded tang break tools offer effective removal of insert tangs and are suited from medium to large insert usage. Being spring loaded this tool requires no external power source and is suitable for tang removal on insert sizes up to 1/2” or M12.This tool is a spring loaded punch and when the tool is pushed down, the pin punches downward breaking off the tang. 

Extraction Tool

 

Should inserts need to be removed, the use of the  extraction tool is recommended. Extraction tools are simple and easy to use. As correct positioning will make the extraction easier, the tool should be turned 90° from the start of the coil allowing easy winding out of the insert. If the extraction tool is not gripping the insert, the edges can be resharpened.

Welcome to buy the tang break-off tools and insert extracting tool in stock from our factory. As one of the leading threaded inserts manufacturers and suppliers in China, we can assure you of the high quality of our products made in China.

Related Products
Inquiry