Metric keensert locking threaded inserts have a smaller OD thread size than standard heavy-duty inserts, ideal for tight spaces where less pull-out strength is acceptable. Keensert locking threaded inserts are ideal for thread reinforcement, especially when the mating stud or bolt will be removed frequently. These inserts provide strong, permanent stainless steel threads in any parent material, ferrous, non-ferrous, or non-metallic. Keensert locking threaded inserts are also well suited for quick repair of stripped, damaged, or worn threads. Locking keys positively prevent the insert from rotating.

Features ：

• Installed with standard drills and taps

• Easy installation and to remove

• May be used in a variety of materials: aluminum, magnesium, cold rolled steel

• Passivated to enhance corrosion-resistance and finish

• Counter bored internal thread on Inch Series ; counter sunk internal thread on Metric Series

Typical Applications ：

• Trucks, RVs

• Machinery, Small Engines

• Molds, Tool and Die

• MRO Tasks

Material: In Carbon Steel - C1215 or equivalent

In Stainless Steel - 303 or equivalent

Keys - 302 CRES or equivalent

Finish: Carbon Steel - Zinc Phosphate

Stainless Steel - Passivated

Tolerances: ±.010 inch or ±.25 mm unless specified otherwise.

Dimensions: Are in inches except metric inserts are in millimeters.

Metric/Inch inserts have a metric internal thread while

all other dimensions are in inches.

Keys: Inserts with an internal thread size of 5/16 or M7 and larger have

4 locking keys,smaller sizes have 2 locking keys.

Tap Drill Hole Tolerance: Inch - .234 to .500 = +.004/-.001

Inch - Over .500 = +.005/-.001

Metric - 6.90 to 10.80 = +.100/-.025

Metric - Over 12.80 = +.130/-.025

KEENSERT LOCKING THREAD INSERT PARAMETER：

Thin wall — Metric Series
Insert					Installation					Removal
Carbon Part No.	Stainless Part No.	Internal Thread Class 6H	External Thread Class 6g	Length in.	Installation Tool Part No.	Tap Drill Size	C'Sink Diameter +.25/-.00	Thread Tap		Drill
								Size Class 6H	Min Depth	Size	Depth
25847	26347	M2- 0.4	M4- 0.7	3.0	24697	3.4	4.1	M4- 0.7	4.0	2.8	2.0
25848	26348	M2.5- 0.45	M4.5- 0.75	3.8	24698	3.9	4.6	M4.5- 0.75	5.0	3.0	2.0
25849	26349	M3- 0.5	M5- 0.8	4.25	24699	4.4	5.1	M5- 0.8	5.5	3.5	2.25
25950	26350	M4- 0.7	M6- 0.75	5.25	24750	5.5	6.1	M6- 0.75	6.5	4.6	2.5
25951	26351	M 5-0.8	M8-1.25	8.0	24751	6.9	8.25	M8-1.25	9.5	5.50	4.00
25952	26352	M6-1	M10-1.25	10.0	24752	8.8	10.25	M10-1.25	11.5	7.50	4.75
25953	26353	M8-1.25	M12-1.25	12.0	24753	10.8	12.25	M12-1.25	13.5	9.50	4.75
26153	26553	M8-1
25955	26355	M10-1.5	M14-1.5	14.0	24755	12.8	14.25	M14-1.5	15.5	11.50	4.75
26155	26555	M10-1.25
25956	26356	M12-1.75	M16-1.5	16.0	24756	14.75	16.25	M16-1.5	17.5	13.50	4.75
26156	26556	M12-1.25

Heavy Duty — Metric Series
Insert					Installation					Removal
Carbon Part No.	Stainless Part No.	Internal Thread Class 6H	External Thread Class 6g	Length in.	Installation Tool Part No.	Tap Drill Size	C'Sink Diameter +.25/-.00	Thread Tap		Drill
								Size Class 6H	Min. Depth	Size	Depth
25963	26363	M4-.7	M8-1.25	8.0	24763	6.90	8.25	M8-1.25	9.5	5.50	4.00
25964	26364	M5-.8	M10-1.25	10.0	24764	8.80	10.25	M10-1.25	12.5	7.50	4.75
25965	26365	M6-1	M12-1.25	12.0	24765	10.80	12.25	M12-1.25	14.5	9.50	4.75
25966	26366	M8-1.25	M14-1.5	14.0	24766	12.80	14.25	M14-1.5	16.5	11.50	4.75
26166	26566	M8-1
25967	26367	M10-1.5	M16-1.5	16.0	24767	14.75	16.25	M16-1.5	18.5	13.50	4.75
26167	26567	M10-1.25
23596	26369	M12-1.75	M18-1.5	18.0	24769	16.75	18.25	M18-1.5	20.5	15.50	4.75
26169	26569	M12-1.25
25970	26370	M14-2	M20-1.5	20.0	24770	18.75	20.25	M20-1.5	22.5	17.50	4.75
26170	26570	M14-1.5
25971	26371	M16-2	M22-1.5	22.0	24771	20.50	22.25	M22-1.5	24.5	17.75	6.35
26171	26571	M16-1.5
26172	26572	M18-1.5	M24-1.5	24.0	24772	22.50	24.25	M24-1.5	26.5	19.75	6.35
25973	26373	M20-2.5	M30-2	30.0	24773	28.00	30.25	M30-2	34.5	25.75	6.35
26173	26573	M20-1.5
26174	26574	M22-1.5	M32-2	32.0	24774	30.00	32.25	M32-2	36.5	27.75	6.35
25975	26375	M24-3	M33-2	33.0	24775	31.00	33.25	M33-2	37.5	28.75	6.35
26175	26575	M24-2

Installation & Removal :

FQA

Q1: Are you trading company or manufacturer ?

A1: We are manufacturer since 2004 in Shen zhen ,China .

Q2: Do you have stock for items ?

A2: Yes , most of items are in stock for shippment .

Q3: How long is your delivery time?

A3: Generally it is 1day for stock item,10-15 days for custom items or big quantity over 50000 pcs .

Q4: Can you provide samples ? is it free or extra ?

A4: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q5. What about the payment terms?

A5: Generally 100% T/T in advance before shippment or mass production ,and we can also consult according to your requirement.

Q6: What's your advantage?

A6: The competitive prices, fast delivery and high quality. responsible-oriented employees strict tolerance, smooth finish and long- life performance.

Q7: What are your machining equipment?
A7: CNC milling machines, CNC turning machines, stamping machines,grinding machines,automatic lathe machines, tapping machines, grinding machines,screw machines, cutting machines and so on.

Q8: How to guarantee the Quality of Industrial Parts?

A8: We have been in fastener field over 19 years with full experience. And there are 5 checks in the whole processing, We have IQC (incoming quality control), IPQCS (in process quality control section), FQC (final quality control) and OQC (out-going quality control) to control each process of industrial parts production.

Hot Tags: metric keensert locking threaded inserts, suppliers China, manufacturers, factory, buy, in stock, made in China