What Are The Installation Tools For Wire Thread Inserts?

The following types of tools are required for the installation of wire thread inserts:
Special tools for wire thread inserts are required to install wire thread inserts, mainly including special taps for wire thread inserts, installation spanners for wire thread inserts, punches, sleeve removers and plug gauges for internal thread bottom holes of wire thread inserts, among which taps are used for processing The threaded bottom hole for the installation of the wire threaded sleeve, the installation wrench is used for the installation of the wire threaded sleeve, the puncher is used for punching the tail handle of the installation, the sleeve remover is used for the disassembly of the screw sleeve, and the bottom hole plug gauge is used for the inspection of the bottom hole .
1. Bottom hole tap: It is used to process the internal thread of the wire thread sleeve. Since the external thread of the wire thread sleeve is a non-standard thread, this kind of tap is different from the ordinary M tap in size.
2. Installation wrench: It is used to install the wire thread sleeve in the threaded bottom hole. The basic principle is to make the wire thread sleeve pass through a guide thread to force the outer diameter of the wire thread sleeve to shrink so that it can be smoothly inserted into the bottom hole. It is divided into manual type and automatic type.
3. Breaker: The purpose of the breaker is mainly to break the installation handle of the wire thread sleeve, especially for the through hole, the installation handle must be broken.
4. Sleeve remover: used to take out the wire threaded sleeve installed in the threaded hole of the substrate. For the threaded sleeve that needs to be replaced for a long time, and when it needs to be taken out due to improper installation or thread jumping during the installation process, etc. use.
5. Thread plug gauge: It is used to detect the bottom hole of the internal thread of the wire thread sleeve. After the wire thread sleeve is installed, the accuracy of the internal thread formed depends on the manufacturing tolerance of the wire thread sleeve and the size of the internal thread bottom hole of the wire thread sleeve. tolerance.